top of page
Young Guns Bookkeeping LOGO - Transparant (3).png
phone-circle.png


     0431 529 503

​

Single Touch Payroll for Small Business What Aussie Employers Need to Know

Writer: younggunsbookkeeping
younggunsbookkeeping
Oct 6
11 min read

Payroll can feel simple until the first pay run goes wrong. You pay someone, withhold tax, accrue super, report to the ATO, keep records, and somehow make sure the employee sees the right information in myGov.


That is where Single Touch Payroll comes in.


STP is the Australian Taxation Office’s payroll reporting system. It does not replace paying staff, paying super, or lodging activity statements. It is a way of sending payroll information to the ATO each time you pay your employees.


For small business owners, the main point is this: if you employ staff, you usually need to report payroll through STP using STP-enabled software or a registered agent.


This guide explains how Single Touch Payroll Australia rules work in plain English, with practical notes for small employers, Xero users, and anyone who wants to avoid messy payroll corrections later.


Eye-level view of a small cafe counter with a calculator, timesheets and payslips beside a coffee cup
STP starts with everyday pay records, not complicated jargon.

What Single Touch Payroll is


Single Touch Payroll, often called STP, is a way of reporting employee payroll information to the ATO.


When you run payroll, your STP-enabled software sends details such as:


  • Salary and wages

  • PAYG withholding

  • Superannuation liability information

  • Employee details

  • Employment and tax treatment information


Employees can then see year-to-date payroll information through their ATO online services in myGov.


Before STP, employers generally gave employees an annual payment summary and reported the same information to the ATO at year end. With STP reporting, the ATO receives payroll information throughout the year.


That does not mean every pay run must be perfect forever. Mistakes can be corrected. But it does mean payroll needs to be set up properly from the start.


How STP works


The basic process is straightforward.


  1. You set up employees in payroll software.

  2. You process a pay run.

  3. You review the payroll details.

  4. You lodge the STP report through the software.

  5. The ATO receives the report.

  6. The employee’s year-to-date information updates in myGov.


For most employers, STP reports are due on or before the day employees are paid. If your business has special circumstances, such as certain closely held payees or an ATO-approved arrangement, the timing may differ. Always check the latest ATO guidance if you are unsure.


STP is not a separate tax return. It is part of your normal payroll process.


A useful way to think about it is:


Payroll task

What it means

Paying wages

Money goes to the employee

Reporting STP

Payroll data goes to the ATO

Paying PAYG withholding

Tax withheld is paid to the ATO through your activity statement process

Paying super

Super contributions are paid to the employee’s super fund


These are connected, but they are not the same thing.


What changed with STP Phase 2


STP Phase 2 expanded the information employers report to the ATO.


The original STP system focused mainly on gross wages, PAYG withholding and super liability. STP Phase 2 gives the ATO more detail about the type of income paid and how it should be treated.


Under STP Phase 2, payroll categories are more detailed. Instead of reporting one broad gross amount, payroll may be split into different components, such as:


  • Ordinary time earnings

  • Paid leave

  • Allowances

  • Bonuses and commissions

  • Overtime

  • Directors’ fees

  • Salary sacrifice

  • Lump sum payments

  • Employment termination payments, where relevant


STP Phase 2 also reports more information about employees, such as employment basis and tax treatment details.


The aim is to reduce duplicated reporting across government systems. For example, some information that used to be sent separately may now be included through STP, depending on the software and the type of information.


For small businesses, the practical issue is simple: your payroll items need to be mapped correctly. If an allowance, leave payment or salary sacrifice amount is put in the wrong category, the STP report may be wrong even if the employee’s net pay looks right.


Who needs to use STP


Most Australian employers need to report through STP.


This includes many small businesses with:


  • Full-time employees

  • Part-time employees

  • Casual employees

  • Directors receiving wages

  • Family members on payroll

  • Apprentices or trainees

  • Employees paid weekly, fortnightly or monthly


Small business owners sometimes assume STP only applies to larger employers. That is not the case. Single Touch Payroll for small business is now part of normal Australian payroll.


There can be special rules or concessions in limited situations. For example, employers with closely held payees, such as some family employees or company directors, may have different reporting options. Some employers may also apply to the ATO for concessions or exemptions in specific circumstances, such as no internet access.


Do not guess here. If you think your business may have a special case, check the current ATO rules or speak with a registered payroll bookkeeper or tax professional.


What information is reported through STP


STP reporting sends payroll data to the ATO. The exact information depends on your employees, your software, and the types of payments you make.


Common information includes:


  • Employer details

  • Employee identity details

  • Tax file number details, where provided

  • Year-to-date gross income

  • PAYG withholding amounts

  • Superannuation liability amounts

  • Income type

  • Employment basis

  • Tax treatment code

  • Allowances and deductions

  • Leave payments

  • Overtime

  • Bonuses and commissions

  • Salary sacrifice arrangements

  • Cessation date and reason when an employee leaves


This is why setup matters. Payroll is not just “hours multiplied by rate”. Each pay item tells the ATO something.


For example, a travel allowance, overtime payment and annual leave payment may all increase an employee’s pay, but they may need to appear differently in STP Phase 2.


Close-up view of handwritten employee hours and a calculator on a timber kitchen table
Correct payroll starts with clear employee records.

STP and PAYG withholding


PAYG withholding is the tax you withhold from employee wages and pay to the ATO.


STP reports the PAYG withholding amount each pay run, but it does not automatically pay that amount to the ATO.


You still need to pay PAYG withholding through your normal activity statement process. Your reporting and payment cycle depends on how the ATO has classified your business. Many small employers report and pay through their BAS or IAS, but the frequency can vary.


A common misunderstanding is:


“I lodged STP, so the tax is paid.”

That is not right. Lodging STP tells the ATO what you withheld. It does not transfer the money.


Good payroll practice means you should:


  • Calculate PAYG withholding correctly

  • Lodge STP on time

  • Set aside withheld tax

  • Lodge your BAS or IAS

  • Pay the ATO by the due date shown for your business


If cash flow is tight, do not treat PAYG withholding as spare money. It belongs to the tax system, even though it sits in your bank account for a period.


STP and superannuation


Super works in a similar way.


STP reports superannuation liability information. In plain English, it reports the super your payroll system says you owe for employees.


It does not mean the super has been paid to the employee’s fund.


You still need to make super guarantee contributions by the required dates and to the correct funds. Current rules require employers to pay super at least quarterly, although many businesses pay monthly or each pay run for better cash flow and cleaner records. The Australian Government has announced changes for payday super from 1 July 2026, so employers should keep an eye on current ATO updates.


The key point is:


STP super reporting

Super payment

Sent to the ATO through payroll software

Paid to the employee’s super fund

Based on payroll records

Must actually clear by the required deadline

Shows a liability

Discharges the liability when paid correctly


If your STP report says super is owed but you never pay it, the report will not protect you. The ATO can use STP and super fund data to identify unpaid or late super.


Using Xero for STP


Many small businesses use Xero for Australian payroll. STP and Xero can work well together, but the software still needs the right setup.


In Xero, STP reporting generally involves:


  • Setting up your organisation’s payroll details

  • Adding employees with correct personal and tax details

  • Setting employment type and pay calendars

  • Creating pay items

  • Mapping pay items for STP Phase 2

  • Processing pay runs

  • Filing STP reports from the pay run

  • Completing year-end finalisation


The biggest risk is assuming Xero “knows” what every pay item should be.


Software can guide you, but it cannot always tell whether a payment is an allowance, reimbursement, bonus, overtime, paid leave or something else. That judgement comes from understanding payroll rules and the employee’s situation.


Common Xero setup issues include:


  • Old pay items not mapped for STP Phase 2

  • Allowances grouped under the wrong category

  • Salary sacrifice set up incorrectly

  • Leave categories not reported correctly

  • Terminated employees not finalised

  • Employee tax details entered incorrectly

  • Super funds or member numbers missing


Xero is a tool. Good payroll still needs human review.


Common STP mistakes small businesses make


Most STP mistakes are not dramatic. They are usually small setup errors repeated over time.


Here are the ones to watch.


Reporting after the pay date


For most employers, STP needs to be lodged on or before payday. Late reporting can happen when the owner pays staff manually, then remembers the software later.


Try to make payroll a single process: calculate, pay, report and file records in one routine.


Wrong employee details


Incorrect names, dates of birth, tax file numbers or addresses can cause problems. Ask employees to provide accurate onboarding details and update records when things change.


Incorrect pay item mapping


This is one of the biggest STP Phase 2 issues. The net pay may be right, but the ATO reporting category may be wrong.


Examples include:


  • Overtime reported as ordinary earnings

  • Allowances reported as general wages

  • Paid leave reported incorrectly

  • Salary sacrifice not separated properly


Forgetting to lodge nil or unusual pay runs


Some businesses skip payroll reporting when there are changes, adjustments or unusual pay runs. If a pay run exists, check whether an STP report is required.


Treating STP as payment


As covered above, STP does not pay PAYG withholding or super. You still need to make the actual payments.


Not finalising employees


Employees rely on finalised income statements to lodge tax returns. If you forget finalisation, staff may see their income statement marked as not tax ready.


How to correct STP errors


Mistakes happen. The ATO expects employers to correct errors once they find them.


The right method depends on the error and your software. In many cases, you can correct the issue in the next regular pay run. In other cases, you may need to lodge an update event or make an adjustment pay run.


Common correction steps are:


  1. Identify what is wrong.

  2. Check whether the employee was overpaid, underpaid, or just reported incorrectly.

  3. Fix the payroll setup if the issue will happen again.

  4. Process the correction in your payroll software.

  5. Lodge the updated STP information.

  6. Keep notes explaining what was corrected and why.


If an employee was underpaid, you may also need to make a back payment and report it correctly. If they were overpaid, get advice before recovering funds, because employment rules apply.


Do not delete and re-enter payroll blindly. That can create duplicate reports or messy year-to-date figures. If you are unsure, check your software guidance, the ATO, or ask a payroll bookkeeper.


Wide-angle view of a shop owner checking printed pay records beside packed product boxes
Reviewing payroll before lodgement helps prevent repeat STP errors.

STP finalisation at year end


At the end of the financial year, employers need to make a finalisation declaration through STP.


This tells the ATO that the payroll information reported for each employee is complete for the year. Once finalised, employees can use their income statement in myGov to prepare their tax return.


For most employers, the STP finalisation due date is 14 July after the end of the financial year. Some situations can have different timing, so check the ATO if your business has special reporting arrangements.


Before finalising, review:


  • Employee year-to-date gross amounts

  • PAYG withholding totals

  • Super liability amounts

  • Allowances

  • Deductions

  • Salary sacrifice

  • Reportable employer super contributions, if applicable

  • Terminated employees

  • Closely held payees, if relevant

  • Any adjustments or back pays


Year-end is not the best time to discover that every allowance has been mapped incorrectly since July. A mid-year payroll check can save a lot of stress.


STP for businesses with one or a few employees


If you have one employee, you may still need STP.


This catches many small operators, especially businesses that employ:


  • A spouse or partner

  • An adult child

  • One casual helper

  • A part-time admin person

  • A company director paid through payroll


The ATO does not ignore payroll just because the business is small.


For very small employers, the best approach is to keep payroll simple:


  • Use STP-enabled payroll software

  • Set up employees properly

  • Avoid manual wage calculations where possible

  • Keep pay days consistent

  • Reconcile payroll to bank payments

  • Pay super regularly

  • Review reports before lodging


If the employee is a closely held payee, such as a family member or director, check current ATO guidance. Some closely held payees may have different STP reporting options, but the details matter.


How a bookkeeper can help


A good payroll bookkeeper does more than press “file” in the software.


They can help set up, review and maintain your payroll so your records match ATO requirements and your staff are paid correctly.


Practical support can include:


  • Setting up STP-enabled payroll software

  • Reviewing employee onboarding details

  • Mapping pay items for STP Phase 2

  • Processing regular pay runs

  • Lodging STP reports

  • Reconciling wages to bank payments

  • Checking PAYG withholding amounts

  • Preparing BAS payroll figures

  • Tracking super liabilities and payments

  • Handling termination payments

  • Fixing STP errors

  • Preparing year-end finalisation


For Melbourne businesses, having someone who understands Australian payroll and local small-business realities can make payroll feel less risky. You still stay in control, but you are not left guessing.


Practical STP checklist for small employers


Use this checklist as a simple health check.


Before you pay employees


  • Confirm each employee has been set up correctly.

  • Collect tax, super and personal details.

  • Choose the correct employment basis.

  • Set up ordinary hours, rates and pay calendar.

  • Check super fund details.

  • Review pay items and STP Phase 2 mapping.

  • Confirm leave entitlements where relevant.


Each pay run


  • Enter hours, leave, allowances and adjustments.

  • Review gross pay, tax, super and net pay.

  • Check unusual items before approving.

  • Pay employees.

  • Lodge the STP report on or before payday, unless a specific arrangement applies.

  • Keep payroll records.


Each month or quarter


  • Reconcile payroll reports to bank transactions.

  • Check PAYG withholding against BAS or IAS figures.

  • Review unpaid super liabilities.

  • Pay super by the required deadline.

  • Fix any payroll errors quickly.


At year end


  • Review employee year-to-date totals.

  • Check terminated employees.

  • Confirm allowances, deductions and salary sacrifice.

  • Make final adjustments.

  • Lodge the STP finalisation declaration.

  • Tell employees when their income statements are tax ready.


Frequently asked questions


Is STP the same as payroll?


No. Payroll is the full process of paying employees, calculating tax, accruing super and keeping records. STP is the reporting part that sends payroll information to the ATO.


Does STP pay PAYG withholding to the ATO?


No. STP reports PAYG withholding. You still pay PAYG withholding through your BAS or IAS process according to your ATO reporting cycle.


Does STP pay employee super?


No. STP reports super liability information. You still need to pay super contributions to employees’ super funds by the required deadlines.


Do I need STP if I only have one employee?


Usually, yes. Small employers are generally required to use STP if they employ staff. Check ATO guidance if your employee is a closely held payee or you think a special rule applies.


What is STP Phase 2?


STP Phase 2 is the expanded version of STP. It reports more detail about income types, pay components, employment details and tax treatment.


Can I lodge STP through Xero?


Yes, Xero supports STP reporting for Australian payroll. The key is making sure employees, pay items and STP Phase 2 settings are correct.


What happens if I make an STP mistake?


You can usually correct STP errors through your payroll software by lodging an update, making an adjustment, or fixing it in a later pay run. The right method depends on the mistake.


Do employees still get payment summaries?


In most STP situations, employees do not receive old-style payment summaries. They access their income statement through myGov after you finalise STP.


When do I finalise STP?


For most employers, STP finalisation is due by 14 July after the end of the financial year. Check the ATO for special cases or changed requirements.


Can a bookkeeper lodge STP for me?


Yes, a registered bookkeeper or BAS agent can help with payroll and STP reporting if they are authorised and the work sits within their permitted services.


Overhead view of a paper payroll checklist, pencil and calculator on a kitchen bench
A simple checklist helps keep STP reporting under control.

The main takeaway


STP Australia rules are not meant to make payroll mysterious. They are meant to give the ATO regular payroll information during the year.


For small employers, the safest approach is simple: use STP-enabled software, set up payroll properly, lodge reports on time, and remember that reporting is separate from paying PAYG withholding and super.


If payroll feels like one more thing squeezed between running jobs, serving customers and managing cash flow, getting help can be well worth it. Young Guns Bookkeeping helps Melbourne small businesses make sense of payroll, STP reporting and the day-to-day bookkeeping that keeps everything moving.


 
 
 

Comments


bottom of page